HDPE Socket Tee

Quality is built into every stage of our production process. Each product undergoes dedicated inspection, and only qualified items are released for shipment. If damage occurs during transportation, we take full responsibility and provide timely solutions.
We believe true service goes beyond delivery. From production updates with photos or videos to responsive after-sales support, we help our customers reduce risk and operate with confidence.

 

Nominal Diameter	Insertion height	Weight
ds110	-	0.602kg
ds110	4.5CM	0.557kg

 

The fitting is manufactured from HDPE using one-piece injection molding and features an equal-diameter tee structure. Each socket is fitted with an integrated rubber sealing ring and uses a push-fit socket connection, allowing pipe assembly without heat fusion or adhesive bonding. It is designed to divide or combine flow in a main pipeline.

 

No special fusion equipment is required; a single installer can complete the connection quickly, significantly shortening installation time. Reliable sealing is achieved as the rubber gasket is compressed against the outer wall of the pipe, accommodating minor pipe misalignment or dimensional tolerance while effectively preventing leakage. This type of HDPE Socket Tee is well suited for fast on-site installation.

 

Nominal Diameter	Insertion height	Weight
ds110	-	0.586kg
ds110	4.5CM	0.531kg

 

This fitting is a branch connector for HDPE piping systems and features a heat-fusion socket structure combined with an upper compression locking cap. One end connects to the main pipe by socket fusion, while the branch uses a heat-fusion insert connection. The upper compression cap reinforces sealing and improves structural stability. Made from the same HDPE material as the pipe, it offers excellent corrosion resistance and material compatibility, enabling stable flow diversion from the main line.

 

High connection reliability, easy installation, and strong compatibility. The material is weather-resistant, acid- and alkali-resistant, and anti-aging, ensuring a service life consistent with the pipeline system. The combination of heat fusion and compression locking delivers strong sealing performance, high joint strength, and low leakage risk. Installation is efficient, and the compression cap can be removed easily for maintenance.

 

Nominal Diameter	Weight
ds110	0.651kg

 

This fitting is a branch connection component used in HDPE piping systems. It consists of a tee body, compression cap, EPDM sealing ring, and a reserved socket outlet. The branch outlet is designed as a pre-set socket that allows the branch pipe to be inserted and secured later. During main pipeline installation, branch connection points can be reserved in advance, eliminating the need for cutting or drilling into an existing pipe and reducing construction risk.

 

Easy installation, high reliability, and strong flexibility. The fitting is fully compatible with HDPE pipes, offering excellent corrosion and aging resistance. Overall service life matches that of the pipeline system, with low long-term maintenance costs.

 

Nominal Diameter	Weight
ds110	0.621kg

 

This fitting is a reserved tee designed specifically for HDPE drainage systems. The body is made from HDPE material and complies with enterprise standard Q/SHHNJ001-2022. The main pipe side uses a heat-fusion socket compatible with standard HDPE drainage pipes, while the lower outlet is a push-fit reserved port. It allows branch connections to be planned during the construction phase and activated later without damaging an operational main pipeline.

 

High connection reliability due to homogeneous heat-fusion bonding with strong resistance to leakage and pull-out. Installation follows standard HDPE fusion practices with high on-site efficiency. Compact structure saves space, and HDPE material ensures excellent resistance to chemicals and aging, keeping maintenance costs low. This reserved-type HDPE Socket Tee supports phased installation and system expansion.

 

Nominal Diameter	Weight
ds110	0.635kg

 

The HDPE compression socket swirl tee is designed for HDPE drainage systems. It is injection-molded from high-density polyethylene and features an internal swirl guide structure, a socket connection, and a compression locking cap. Installation requires no heat fusion-pipes are inserted into the socket and secured by tightening the compression cap. The smooth inner wall and spiral flow channel guide wastewater along the inner wall of the vertical pipe, reducing pressure fluctuation, drainage noise, and odor backflow.

 

Fast installation without fusion equipment, good sealing performance even with minor pipe size deviations, excellent impact and aging resistance, and high drainage efficiency. The swirl structure optimizes internal flow, reduces air resistance, and improves overall drainage performance.

 

Nominal Diameter	Weight
ds110	0.656kg

 

This fitting is a specialized connector for HDPE drainage systems, integrating a swirl-flow tee body, a central heat-fusion socket, and compression-type socket connections on both sides. The inner wall includes a spiral flow channel. The center port is heat-fused to the pipe, while the side connections use compression locking, combining sealing strength with installation flexibility.

 

High sealing reliability from the heat-fusion center connection, with flexible installation from compression sockets. The swirl design improves drainage efficiency, reduces noise, and stabilizes air pressure. HDPE material provides strong resistance to corrosion, impact, and aging. The combined connection method reduces installation steps and shortens construction time.

 

Nominal Diameter	Weight
ds110	0.661kg

 

1,This fitting is a reserved branch connector with an integrated swirl-flow structure. It includes a swirl-type tee body, a compression socket for the main pipe, and a sealed reserved outlet. The spiral flow channel guides wastewater smoothly downward, stabilizing air pressure and preventing odor backflow. The reserved outlet can be opened later as needed, making it ideal for future branch expansion in building drainage risers.

 

Practical reserved-branch design reduces future renovation cost. Easy installation with compression socket connection, reliable sealing of the reserved port, excellent drainage performance with reduced noise, and long service life thanks to HDPE's corrosion- and aging-resistant properties.

 

Hot Tags: HDPE socket tee, China HDPE socket tee manufacturers, suppliers, factory, HDPE Bottle Tee, HDPE Lateral Tee, HDPE Reducing Lateral Tee, HDPE Reducing Tee, HDPE Socket Tee, hdpe tee fittings